PD6710 Datasheet, PDF (101/138 Pages) Intel Corporation – ISA-to-PC-Card (PCMCIA) Controllers

ISA-to-PC-Card (PCMCIA) Controllers — PD6710/’22
16.0 Electrical Specifications
16.1
Absolute Maximum Ratings
Ambient temperature under bias
Storage temperature
Voltage on any pin (with respect to ground)
Operating power dissipation
Suspend power dissipation
Power supply voltage
Injection current (latch up)
0°C to 70°C
−65°C to 150°C
−0.5 volts to 0.5 volts greater than voltage of +5V pin,
respective to ground
500 mW
10 mW
7 volts
25 mA
Caution:
Stresses above those listed may cause permanent damage to system components. These are stress
ratings only; functional operation at these or any conditions above those indicated in the
operational sections of this specification is not implied. Exposure to absolute maximum rating
conditions for extended periods may affect system reliability.
16.2
DC Specifications
Table 20. General DC Specifications
Symbol
C_IN
C_OUT
I_IL
I_PU
Parameter
Input Capacitance
Output Capacitance
Input Leakage
Internal Pull-up Current
MIN
−10.0
−30
MAX
10.0
10.0
10.0
−400
Unit
pF
pF
µA
µA
Conditions
0 < V_IN < respective V_CC supply pin
Table 21. PC Card Bus Interface DC Specifications (Sheet 1 of 2)
Symbol
Parameter
MIN
MAX
Unit
Conditions
SOCKET_VCC_5V Power Supply Voltage
SOCKET_VCC_3V Power Supply Voltage
V_IH
Input High Voltage
V_IL
Input Low Voltage
4.5
5.5
V
Normal operation
3.0
3.6
V
2.0
V
CORE_VDD = 3.0 V,
Misc Control 2 register, bit 3 is ‘0’
2.0
V
CORE_VDD = 4.5 V,
Misc Control 2 register, bit 3 is ‘1’
0.8
V
CORE_VDD = 3.6 V,
Misc Control 2 register, bit 3 is ‘0’
0.8
V
CORE_VDD = 5.5 V,
Misc Control 2 register, bit 3 is ‘1’
Datasheet
101