English
Language : 

PD6710 Datasheet, PDF (11/138 Pages) Intel Corporation – ISA-to-PC-Card (PCMCIA) Controllers
2.0
2.1
ISA-to-PC-Card (PCMCIA) Controllers — PD6710/’22
General Conventions
The following general conventions apply to this document.
Throughout this document, PD67XX means PD6710 and PD6722.
Bits within words and words within various memory spaces are generally numbered with a 0 (zero)
as the least-significant bit or word. For example, the least-significant bit of a byte is bit 0, while the
most-significant bit is bit 7.
In addition, number ranges for bit fields and words are presented with the most-significant value
first. Thus, when discussing a bit field within a register, the bit number of the most-significant bit is
written first, followed by a colon (:) and then the bit number of the least-significant bit; as in,
bits 7:0.
In this document, the names of the PD67XX internal registers are boldfaced. For example, Chip
Revision and Power Control are register names. The names of bit fields are written with initial
uppercase letters. For example, Card Power On and Battery Voltage Detect are bit field names.
Numbers and Units
The unit Kbyte designates 1024 bytes (210). The unit Mbyte designates 1,048,576 bytes (220). The
unit Gbyte designates 1,073,741,824 bytes (230). The unit Hz designates hertz. The unit kHz
designates 1000 Hz. The unit MHz designates 1,000,000 Hz. The unit ms designates millisecond.
The unit µs designates microsecond. The unit ns designates nanosecond. The unit mA designates
milliampere. The unit V immediately following a number designates volt.
Hexadecimal numbers are presented with all letters in uppercase and a lowercase h appended. For
example, 14h and 03CAh are hexadecimal numbers.
Binary numbers are enclosed in single quotation marks when in text. For example, ‘11’ is a binary
number.
Numbers not appended with an h nor enclosed by single quotation marks are decimal.
In addition, a capital letter X is used within numbers to indicate digits ignored by the PD67XX
within the current context. For example, ‘101XX01’ is a binary number with bits 3:2 ignored.
Datasheet
11