DD28F032SA Datasheet, PDF (19/49 Pages) Intel Corporation – 32-MBIT (2 MBIT X 16, 4 MBIT X 8) FlashFile MEMORY

E
DD28F032SA
6.0 ELECTRICAL SPECIFICATIONS
6.1 Absolute Maximum Ratings*
Temperature Under Bias ....................0°C to +80°C
Storage Temperature ...................–65°C to +125°C
NOTICE: This is a production datasheet. The specifications
are subject to change without notice. Verify with your local
Intel Sales office that you have the latest datasheet before
finalizing a design.
* WARNING: Stressing the device beyond the "Absolute
Maximum Ratings" may cause permanent damage. These
are stress ratings only. Operation beyond the "Operating
Conditions" is not recommended and extended exposure
beyond the "Operating Conditions" may affect device
reliability.
V_CC = 3.3V ± 0.3V Systems
Symbol
Parameter
TA
Operating Temperature, Commercial
V_CC
V_CC with Respect to GND
V_PP
V_PP Supply Voltage with Respect to GND
V
Voltage on any Pin (except V_CC,V_PP) with
Respect to GND
I
Current into Any Non-Supply Pin
I_OUT
Output Short Circuit Current
Notes Min Max Units Test Conditions
1
0 70 °C
Ambient
Temperature
2 –0.2 7.0 V
2,3 –0.2 14.0 V
2
–0.5 ^VCC
V
+ 0.5
5
± 30 mA
4
100 mA
V_CC = 5.0V ± 0.5V, V_CC = 5.0V ± 0.25V Systems⁽⁶⁾
Symbol
Parameter
Notes Min Max Units Test Conditions
TA
Operating Temperature, Commercial
1
0 70 °C
Ambient
Temperature
V_CC
V_CC with Respect to GND
2 –0.2 7.0 V
V_PP
V_PP Supply Voltage with Respect to GND 2,3 –0.2 14.0 V
V
Voltage on Any Pin (except V_CC,V_PP) with
2
–2.0 _7.0
V
Respect to GND
I
Current into Any Non-Supply Pin
5
± 30 mA
I_OUT
Output Short Circuit Current
4
100 mA
NOTES:
1. Operating temperature is for commercial product defined by this specification.
2. Minimum DC voltage is –0.5V on input/output pins. During transitions, this level may undershoot to–2.0V for periods
<20 ns. Maximum DC voltage on input/output pins is V_CC + 0.5V which, during transitions, may overshoot to V_CC + 2.0V for
periods <20 ns.
3. Maximum DC voltage on V_PP may overshoot to +14.0V for periods <20 ns.
4. Output shorted for no more than one second. No more than one output shorted at a time.
5. This specification also applies to pins marked “NC.”
6. 5% V_CC specifications refer to the DD28F032SA-070 in its High Speed Test configuration.
19