XC2288H_11 Datasheet, PDF (95/151 Pages) Infineon Technologies AG – 16/32-Bit Single-Chip Microcontroller with 32-Bit Performance

XC2288H, XC2289H
XC2000 Family / High Line
Electrical Parameters
4.3.1 DC Parameters for Upper Voltage Area
Keeping signal levels within the limits specified in this table ensures operation without
overload conditions. For signal levels outside these specifications, also refer to the
specification of the overload current I_OV.
Note: Operating Conditions apply.
Table 16 is valid under the following conditions: V_DDPtyp. 5 V; V_DDP≥ 4.5 V; V_DDP≤ 5.5 V
Table 16 DC Characteristics for Upper Voltage Range
Parameter
Symbol
Values
Unit Note /
Min. Typ. Max.
Test Condition
Pin capacitance (digital
inputs/outputs). To be
doubled for double bond
pins.¹⁾
Input Hysteresis²⁾
Absolute input leakage
current on pins of analog
ports³⁾
C_IO CC −
−
HYS CC 0.11 x −
V_DDP
|I_OZ1|
−
10
CC
10
pF not subject to
production test
−
V R_S= 0 Ohm
200 nA V_IN> V_SS V;
V_IN< V_DDP
Absolute input leakage |I_OZ2| −
current for all other pins. CC
To be doubled for double
bond pins.³⁾¹⁾⁴⁾
−
0.2 5
0.2 15
Pull Level Force Current⁵⁾ |I_PLF| SR 250 −
−
Pull Level Keep Current⁶⁾ |I_PLK| −
−
30
SR
μA T_J≤ 110 °C;
V_IN> V_SS V;
V_IN< V_DDP
μA T_J≤ 150 °C;
V_IN> V_SS V;
V_IN< V_DDP
μA V_IN≥
V_IHmin(pulldown
_enabled) ;
V_IN≤ V_ILmax(pull
up_enabled)
μA V_IN≥ V_IHmin(pull
up_enabled) ;
V_IN≤ V_ILmax(pull
down_enabled)
Input high voltage (all
except XTAL1)
Input low voltage
(all except XTAL1)
V_IH SR 0.7 x −
V_DDP
V_IL SR -0.3 −
V_DDP + V
0.3
0.3 x V
V_DDP
Data Sheet
95
V1.3, 2011-07