XC2288H_11 Datasheet, PDF (89/151 Pages) Infineon Technologies AG – 16/32-Bit Single-Chip Microcontroller with 32-Bit Performance

XC2288H, XC2289H
XC2000 Family / High Line
Electrical Parameters
4.1.1 Operating Conditions
The following operating conditions must not be exceeded to ensure correct operation of
the XC228xH. All parameters specified in the following sections refer to these operating
conditions, unless otherwise noticed.
Note: Typical parameter values refer to room temperature and nominal supply voltage,
minimum/maximum parameter values also include conditions of
minimum/maximum temperature and minimum/maximum supply voltage.
Additional details are described where applicable.
Table 13 Operating Conditions
Parameter
Symbol
Min.
Voltage Regulator Buffer C_EVRM 1.0
Capacitance for DMP_M SR
Voltage Regulator Buffer C_EVR1 0.68
Capacitance for DMP_1 SR
External Load
Capacitance
C_L SR −
System frequency
Overload current for
analog inputs⁶⁾
f_SYS SR −
I_OVA SR -2
Values
Typ. Max.
−
4.7
Unit Note /
Test Condition
μF
1)
−
2.2 μF
2)1)
20³⁾ −
pF pin out
driver= default
4)
−
100 MHz ⁵⁾
−
5
mA not subject to
production test
Overload current for digital I_OVD SR -5
−
5
mA not subject to
inputs⁶⁾
production test
Overload current coupling K_OVA −
factor for analog inputs⁷⁾ CC
2.5 x 1.5 x -
10^-4
10^-3
I_OV< 0 mA; not
subject to
production test
−
1.0 x 1.0 x -
I_OV> 0 mA; not
10^-6
10^-4
subject to
production test
Data Sheet
89
V1.3, 2011-07