TLE9261-3QX Datasheet, PDF (79/186 Pages) Infineon Technologies AG – Dedicated Data Sheets are available for the different product variants

9.3
Electrical Characteristics
TLE9261-3QX
High-Side Switch
Table 22 Target Specifications
V_S = 5.5 V to 28 V; T_j = -40 °C to +150 °C; all voltages with respect to ground, positive current flowing into pin
(unless otherwise specified)
Parameter
Symbol
Min.
Values
Unit Note /
Number
Typ. Max.
Test Condition
Output HS1, HS2, HS3, HS4
Static Drain-Source ON
Resistance HS1...HS4
R_ON,HS25
–
Static Drain-Source ON
Resistance HS1...HS4
R_ON,HS150
–
Leakage Current HSx / per I_leak,HS
–
channel
Output Slew Rate (rising)
SR_raise,HS
0.8
Output Slew Rate (falling) SR_fall,HS
-2.5
Switch-on time HSx
t_ON,HS
3
Switch-off time HSx
t_OFF,HS
3
Short Circuit Shutdown
I_SD,HS
150
Current
Short Circuit Shutdown Filter t_SD,HS
Time
7
–
11.5 16
–
2
–
2.5
–
-0.8
–
30
–
30
245 300
16
Ω
Ω
µA
V/µs
V/µs
µs
µs
mA
µs
I_ds = 60mA,
T_j < 25°C
I_ds = 60mA,
T_j < 150°C
1)_{0 V < VHSx}
< VSHS;
Tj < 85°C
1)_{20 to 80%}
V_SHS = 6 to 18V
R_L = 220Ω
1)_{80 to 20%}
V_SHS = 6 to 18V
R_L = 220Ω
CSN = HIGH to
0.8*VSHS;
R_L = 220Ω;
V_SHS = 6 to 18V
CSN = HIGH to
0.2*VSHS;
R_L = 220Ω;
V_SHS = 6 to 18V
V_SHS = 6 to 20V,
hysteresis
included
2)_, 3)
P_9.3.1
P_9.3.2
P_9.3.11
P_9.3.3
P_9.3.4
P_9.3.5
P_9.3.6
P_9.3.7
P_9.3.8
Open Load Detection Current I_OL,HS
0.4
Open Load Detection
hysteresis
I_OL,HS,hys
–
Open Load Detection Filter t_OL,HS
–
Time
–
3
0.45 –
64
–
mA hysteresis
included
mA ¹⁾
µs
2)_, 3)
P_9.3.9
P_9.3.14
P_9.3.10
1) Not subject to production test, specified by design.
2) Not subject to production test, tolerance defined by internal oscillator tolerance.
3) The minimum PWM setting for reliable detection of over current and open load measurement is 5 digits for a period of
200Hz and 3 digits for a period of 150Hz.
Data Sheet
79
Rev. 1.1, 2014-09-26