TLE9261-3QX Datasheet, PDF (18/186 Pages) Infineon Technologies AG – Dedicated Data Sheets are available for the different product variants

TLE9261-3QX
General Product Characteristics
Table 4 Current Consumption (cont’d)
Current consumption values are specified at Tj = 25°C, VS = 13.5V, all outputs open (unless otherwise specified)
Parameter
Symbol
Values
Unit Note / Test Condition Number
Min. Typ. Max.
Feature Incremental Current Consumption
Current consumption for CAN I_CAN,rec
–
module, recessive state
Current consumption for CAN I_CAN,dom
–
module, dominant state
Current consumption for CAN I_CAN,RcvOnly –
module, Receive Only Mode
Current consumption during I_CAN,SWK,25 –
CAN Partial Networking
frame detect mode
(RX_WK_ SEL = ‘1’)
Current consumption during I_CAN,SWK,85 –
CAN Partial Networking
frame detect mode
(RX_WK_ SEL = ‘1’)
Current consumption for
WK1..3 wake capability
(all wake inputs)
I_Wake,WKx,25 –
2
3
mA SBC Normal/Stop
P_4.4.7
Mode; CAN Normal
Mode; VCC1
connected to VCAN;
VTXDCAN = VCC1;
no RL on CAN
3
4.5
mA ³⁾SBC Normal/Stop P_4.4.8
Mode; CAN Normal
Mode; VCC1
connected to VCAN;
VTXDCAN = GND;
no RL on CAN
0.9
1.2
mA ³⁾⁴⁾SBC Normal/Stop P_4.4.9
Mode; CAN Receive
Only Mode; VCC1
connected to VCAN;
VTXDCAN = VCC1;
no RL on CAN
560
690
µA
3)_{Tj = 25°C;}
SBC Stop Mode;
P_4.4.4
VCC2, HSx = OFF;
WKx not wake
capable;
CAN SWK wake
capable, SWK
Receiver enabled,
WUF detect;
no RL on CAN
600
720
µA
3)_{Tj = 85°C;}
SBC Stop Mode;
P_4.4.29
VCC2, HSx = OFF;
WKx not wake
capable;
CAN SWK wake
capable, SWK
Receiver enabled,
WUF detect;
no RL on CAN
0.2
2
µA ⁵⁾⁶⁾⁷⁾ SBC Sleep Mode; P_4.4.13
WK1..3 wake capable
(all WKx enabled);
CAN = OFF
Data Sheet
18
Rev. 1.1, 2014-09-26