TC1765 Datasheet, PDF (73/88 Pages) Infineon Technologies AG – 32-Bit Single-Chip Microcontroller

TC1765
Preliminary
Power Supply Current
T_A = -40 °C to +125 °C;
Parameter
Symbol
Limit Values Unit Test Conditions
min. typ.¹⁾ max.
Active mode supply current I_DD
CC –
–
–
–
200 mA PORST = V_IL2)3)
260 290 mA Sum of I_DDS4)3)
7
10 mA I_DD at V_DDP4)
– 201 –
mA I_DD at V_DD
(Core and EBU)⁴⁾
Idle mode supply current I_ID
Sleep mode supply current I_SL
Deep sleep mode supply I_DS
current
Stand-by pin power supply I_SB
current
–
–
–
CC –
CC –
CC –
–
CC –
–
31 –
mA I_DD at V_DDRAM4)
21⁴⁾ 120⁵⁾ mA I_DD at V_DDSBRAM
0.1 –
mA I_DD at V_DDAx4)
123 –
mA PORST = V_IH2)6)7)
50 –
mA PORST = V_IH2)7)
5
900 µA PORST = V_IH8)
1
4.4 mA PORST = V_IH9)
1
250 µA I_DD at V_DDSBRAM10)
1
200 µA ¹¹⁾
1) _{Parameters in this column are tested at 25 °C, 40 MHz system clock (if applicable) and nominal VDD voltages.}
2) _{These parameters are tested at VDDmax and 40 MHz system clock (bypass mode) with all outputs}
disconnected and all inputs at V_IL or V_IH.
3) _{These power supply currents are defined as the sum of all currents at the VDD power supply lines:}
V_DD + V_DDP + V_DDRAM + V_DDSBRAM + V_DDOSC + V_DDM + V_DDA0 + V_DDA1
4) _{These power consumption characteristics are measured while running a typical application pattern. The power}
consumption of modules can increase or decrease using other application programs. The PLL is inactive
during this measurement.
5) _{This parameter has been evaluated at design characterization using an atypical test pattern that makes}
extensive usage of the DMU memory.
6) _{All peripherals are enabled and in idle state.}
7) _{Guaranteed by design characterization.}
8) _{This is the sum of all 2.5 V power supply currents.}
9) _{This is the sum of all 5 V power supply currents.}
10) _{TC1765 in deep sleep mode.}
11) _{All other VDD pins are at 0 V; TJ = 150 °C; VDDSBRAM = 2.0 V.}
Data Sheet
69
V1.2, 2002-12