TC1765 Datasheet, PDF (21/88 Pages) Infineon Technologies AG – 32-Bit Single-Chip Microcontroller

TC1765
Preliminary
Table 1
Pin Definitions and Functions (cont’d)
Symbol
V_DDM
V_SSM
V_DDA0
V_SSA0
V_DDA1
V_SSA1
V_AREF0
V_AGND0
V_AREF1
V_AGND1
N.C.
Pin
B4
A4
A9
B7
G4
D1
A8
C6
C1
E2
V17,
V18
In Functions
Out
– ADC Analog Part Power Supply (5 V)¹⁰⁾
– ADC Analog Part Ground for V_DDM
– ADC0 Analog Part Power Supply (2.5 V)⁹⁾
– ADC0 Analog Part Ground for V_DDA0
– ADC1 Analog Part Power Supply (2.5 V)⁹⁾
– ADC1 Analog Part Ground for V_DDA1
– ADC0 Reference Voltage¹⁰⁾
– ADC0 Reference Ground
– ADC1 Reference Voltage¹⁰⁾
– ADC1 Reference Ground¹⁰⁾
– Not Connected; reserved for future expansions
1) _{These pins have a drive capability of 600 µA when used as outputs.}
2) _{These pins can be connected with internal pull-up devices by setting bit SCU_CON.EBUDPEN.}
3) _{These outputs have a drive capability of 600 µA.}
4) _{These pins can be connected with internal pull-up devices by setting bit SCU_CON.EBUAPEN.}
5) _{These pins can be connected with internal pull-up devices by setting bit SCU_CON.EBUCPEN.}
6) _{These pins have a drive capability of 2.4 mA when used as outputs.}
7) _{These pins have an internal pull-down device connected.}
8) _{These pins have an internal pull-up device connected.}
9) _{The voltage on power supply pins marked with} 10) _{has to be raised earlier or at least at the same time (= time}
window of 1 µs) than on power supply pins marked with ⁹⁾ (details see power supply section on Page 54).
10) _{See note} 9)_.
Data Sheet
17
V1.2, 2002-12