TC1765 Datasheet, PDF (61/88 Pages) Infineon Technologies AG – 32-Bit Single-Chip Microcontroller

TC1765
Preliminary
Absolute Maximum Ratings
Parameter
Symbol Limit Values Unit Notes
min.
max.
Ambient temperature
T_A
-40
Storage temperature
T_A
-65
Junction temperature
T_J
–
Voltage on V_DDP with respect to V_DD
-0.5
V_SS
Voltage on V_DD, V_DDOSC,
V_DD
-0.5
V_DDRAM and V_DDSBRAM with
respect to V_SS
Voltage on any Class A input pin V_IN
-0.5
with respect to V_SS
Voltage on any Class B input pin V_IN
-0.5
with respect to V_SS
Voltage on any Class C input pin V_IN
-0.5
with respect to V_SS
Input current on any pin during I_IN
-10
overload condition
125
°C under bias
150
°C –
150
°C under bias
6.2
V see Table 8
3.25
V–
V_DD + 0.5 V –
3.7
V–
V_DDOSC V
–
+ 0.5
10
mA –
Absolute sum of all input currents ΣI_IN
–
during overload condition
|100|
mA –
Note: Stresses above those listed under “Absolute Maximum Ratings” may cause
permanent damage to the device. This is a stress rating only and functional
operation of the device at these or any other conditions above those indicated in
the operational sections of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect device reliability.
During absolute maximum rating overload conditions (V_IN > V_DD or V_IN < V_SS) the
voltage on V_DD pins with respect to ground (V_SS) must not exceed the values
defined by the absolute maximum ratings.
Data Sheet
57
V1.2, 2002-12