TDA5150 Datasheet, PDF (6/106 Pages) Infineon Technologies AG – On-chip, high resolution fractional-N synthesizer and Sigma-Delta modulator with ASK, FSK, GFSK options

TDA 5150
1
Product Description
Product Description
1.1
Overview
The TDA 5150 is a low cost and easy to implement, multi-channel ASK/FSK/GFSK RF
transmitter for the 300-320 MHz, 425-450 MHz, 863 - 928 MHz frequency bands with
low power consumption and RF-output power of up to +10 dBm.
The IC offers a high level of integration and needs only a few external components, such
as a crystal, blocking capacitors and the necessary matching elements between the
power amplifier output and the antenna.
On-chip antenna tuning capacitors are implemented.
An integrated high-resolution sigma-delta fractional-N PLL synthesizer covers all of the
above listed frequency bands, using the same crystal for reference frequency
generation.
The configurable digital modulator allows precise FSK modulation and Gaussian
shaping (GFSK), which contributes to reduction of occupied bandwidth.
The output power of the integrated class-C RF power amplifier can be controlled over
the SPI bus and if necessary, downsized (reduced) in digital steps.
ASK shaping option contributes to reduced harmonics and minimized spectral splatter.
The data encoder supports NRZ, Manchester, Bi-Phase, and Miller encoding.
The device is fully configureable via the 3-wire Serial Peripheral Interface (SPI).
1.2
Features
• High resolution Sigma-Delta fractional-N PLL synthesizer (frequency step size down to 7 Hz)
• Multiband/Multichannel capability for the 300-320 MHz, 425-450 MHz and 863-928 MHz bands
• Modulation types ASK (OOK) with ASK shaping, FSK (CPFSK) and GFSK
• Multi-channel and channel hopping capability, 4 register banks for fast Tx frequency switching
• Configurable via 3-wire serial interface bus (SPI)
• Manchester, Bi-Phase, and Miller encoding, on-chip PRBS9 scrambler
• Continuos checking of chip status by Fail-Safe mechanism
• Transparent and synchronized RF modulation mode
• Programmable clock divider output
• Configurable output power level from -10 dBm to +10 dbm, in 2 dB nominal steps
• Supply voltage range 1.9 V - 3.6 V, 2 low battery detection thresholds, preset to 2.4V and 2.1V
• Low supply current (Sleep Mode < 0.8 µA, RF transmission 9 mA @ +5 dBm)
• ESD protection up to +/- 4 kV on all pins
• Operating temperature range -40°C to +85°C
• Green Package TSSOP-10
Data Sheet
6
V 1.0, July 2009