ICS1893AFLF Datasheet, PDF (29/136 Pages) Integrated Device Technology – 3.3-V 10Base-T/100Base-TX Integrated PHYceiver™

ICS1893AF Data Sheet - Release
Chapter 6 Interface Overviews
6.4 Clock Reference Interface
The REF_IN pin provides the ICS1893AF Clock Reference Interface. The ICS1893AF requires a single
clock reference with a frequency of 25 MHz ±50 parts per million. This accuracy is necessary to meet the
interface requirements of the ISO/IEEE 8802-3 standard, specifically clauses 22.2.2.1 and 24.2.3.4. The
ICS1893AF supports two clock source configurations: a CMOS oscillator or a CMOS driver. The input to
REF_IN is CMOS (10% to 90% VDD), not TTL. Alternately, a 25MHz crystal may be used. The Oscillator
specifications are shown in Table 6.1.
Figure 6-3. Crystal or Oscillator Operation
Crystal
REF_OUT
46
REF_IN
47
25.000MHz
33 pF
33 pF
Oscillator
REF_OUT
46
REF_IN
47
NC
CMOS
25.000
MHz
33 Ohm
10 pF
ICS1893AF, Rev. D 10/26/04
Copyright © 2004, Integrated Circuit Systems, Inc.
All rights reserved.
29
October, 2004