ICS1893AFLF Datasheet, PDF (112/136 Pages) Integrated Device Technology – 3.3-V 10Base-T/100Base-TX Integrated PHYceiver™

ICS1893AF Data Sheet - Release
Chapter 10 DC and AC Operating Conditions
10.4 DC Operating Characteristics
This section lists the ICS1893AF DC operating characteristics.
10.4.1 DC Operating Characteristics for Supply Current
Table 10-4 lists the DC operating characteristics for the supply current to the ICS1893AF under various
conditions.
Note: All VDD_IO measurements are taken with respect to VSS (which equals 0 V).
Table 10-4. DC Operating Characteristics for Supply Current
Parameter
Supply Current†
Operating Mode
100Base-TX‡
Supply Current† 10Base-T‡
Supply Current† Auto-Negotiation
Supply Current† Power-Down
Supply Current† Reset
Symbol
IDD_IO
IDD
IDD_IO
IDD
IDD_IO
IDD
IDD_IO
IDD
IDD
Min.
–
–
–
–
–
–
–
–
–
Typ.
8
110
5
150
5
80
3
4
10
Max.
11
125
8
160
8
90
5
5
11
Units
mA
mA
mA
mA
mA
mA
mA
mA
mA
† These supply current parameters are measured through VDD pins to the ICS1893AF. The supply current
parameters include external transformer currents.
‡ Measurements taken with 100% data transmission and the minimum inter-packet gap.
10.4.2 DC Operating Characteristics for TTL Inputs and Outputs
Table 10-5 lists the 3.3-V DC operating characteristics of the ICS1893AF TTL inputs and outputs.
Note: All VDD_IO measurements are taken with respect to VSS (which equals 0 V).
Table 10-5. 3.3-V DC Operating Characteristics for TTL Inputs and Outputs
Parameter
TTL Input High Voltage
TTL Input Low Voltage
TTL Output High Voltage
TTL Output Low Voltage
TTL Driving CMOS,
Output High Voltage
TTL Driving CMOS,
Output Low Voltage
Symbol
Conditions
V_IH VDD_IO = 3.47 V
–
V_IL VDD_IO = 3.47 V
–
V_OH VDD_IO = 3.14 V I_OH = –4 mA
V_OL VDD_IO = 3.14 V I_OL = +4 mA
V_OH VDD_IO = 3.14 V I_OH = –4 mA
Min.
2.0
–
2.4
–
2.4
Max.
–
0.8
–
0.4
–
Units
V
V
V
V
V
V_OL VDD_IO = 3.14 V I_OL = +4 mA
–
0.4
V
ICS1893AF, Rev D 10/26/04
Copyright © 2004, Integrated Circuit Systems, Inc.
All rights reserved.
112
October, 2004