English
Language : 

MC68HC05C9A Datasheet, PDF (91/124 Pages) Freescale Semiconductor, Inc – Microcontrollers
◁
3.3-Volt DC Electrical Characteristics
12.6 3.3-Volt DC Electrical Characteristics
Characteristic(1) (2)
Symbol
Min
Typ
Max
Unit
Output voltage
ILoad = 10.0 µA
ILoad = –10.0 µA
Output high voltage
(ILoad = –0.2 mA) PA7–PA0, PB7–PB0, PC6–PC0,
TCMP, PD7, PD0
(ILoad = –0.4 mA) PD5–PD1
(ILoad = –1.5 mA) PC7
Output low voltage
(ILoad = 0.4 mA) PA7–PA0, PB7–PB0, PC6–PC0,
PD7, PD5–PD0, TCMP
(ILoad = 6 mA) PC7
Input high voltage
PA7–PA0, PB7–PB0, PC7–PC0, PD7,
PD5–PD0, TCAP, IRQ, RESET, OSC1
Input low voltage
PA7–PA0, PB7–PB0, PC7–PC0, PD7,
PD5–PD0, TCAP, IRQ, RESET, OSC1
VOL
—
—
VOH
VDD–0.1
—
0.1
V
—
VOH
VDD–0.3
—
VDD–0.3
—
VDD–0.3
—
VOL
—
—
—
—
VIH
0.7 × VDD
—
—
V
—
—
0.3
V
0.3
VDD
V
VIL
VSS
—
0.2 × VDD
V
Supply current (3.0–3.6 Vdc @ fOP = 1.0 MHz)
Run(3)
Wait(4)
Stop(5)
25°C
0 to 70°C
–40 to +125°C
I/O ports hi-z leakage current
PA7–PA0, PB7–PB0 (without pullup)
PC7–PC0, PD7, PD5–PD0
Input current
RESET, IRQ, OSC1, TCAP, PD7, PD5–PD0
—
1.0
1.6
mA
—
500
900
µA
IDD
—
1.0
8
µA
—
1.0
16
µA
—
2.5
20
µA
IOZ
—
1.0
10
µA
IIn
—
0.5
1
µA
Input pullup current(6)
PB7–PB0 (with pullup)
IIn
0.5
—
20
µA
Capacitance
Ports (as input or output)
RESET, IRQ, OSC1, TCAP, PD7, PD5, PD0
COut
—
—
12
pF
CIn
—
—
8
1. VDD = 3.3 Vdc ± 0.3 Vdc, VSS = 0 Vdc, TA = –40 to +125°C, unless otherwise noted
2. Typical values reflect measurements taken on average processed devices at the midpoint of voltage range, 25°C only.
3. Run (operating) IDD measured using external square wave clock source; all I/O pins configured as inputs, port B = VDD,
all other inputs VIL = 0.2 V, VIH = VDD –0.2 V; no dc loads; less than 50 pF on all outputs; CL = 20 pF on OSC2
4. Wait IDD measured using external square wave clock source; all I/O pins configured as inputs, port B = VDD, all other
inputs VIL = 0.2 V, VIH = VDD –0.2 V; no dc loads; less than 50 pF on all outputs; CL = 20 pF on OSC2. Wait IDD is
affected linearly by the OSC2 capacitance.
5. Stop IDD measured with OSC1 = 0.2 V; all I/O pins configured as inputs, port B = VDD, all other inputs VIL = 0.2 V,
VIH = VDD –0.2 V
6. Input pullup current measured with VIL = 0.2 V
MC68HC05C9A Advance Information Data Sheet, Rev. 5.1
Freescale Semiconductor
91
 ▷