English
Language : 

MC68HC05C9A Datasheet, PDF (59/124 Pages) Freescale Semiconductor, Inc – Microcontrollers
Transmit Data Out (TDO)
9.10 Transmit Data Out (TDO)
Transmit data is the serial data from the internal data bus that is applied through the SCI to the output
line. Data format is as discussed in 9.6 Data Format and shown in Figure 9-3. The transmitter generates
a bit time by using a derivative of the RT clock, thus producing a transmission rate equal to 1/16th that of
the receiver sample clock.
9.11 SCI I/O Registers
These I/O registers control and monitor SCI operation:
• SCI data register (SCDR)
• SCI control register 1 (SCCR1)
• SCI control register 2 (SCCR2)
• SCI status register (SCSR)
9.11.1 SCI Data Register
The SCI data register (SCDR), shown in Figure 9-8, is the buffer for characters received and for
characters transmitted.
Address: $0011
Bit 7
Read:
SCD7
Write:
Reset:
6
5
4
3
2
SDC6
SCD5
SCD4
SCD3
SCD2
Unaffected by reset
Figure 9-8. SCI Data Register (SCDR)
1
SCD1
Bit 0
SCD0
9.11.2 SCI Control Register 1
The SCI control register 1 (SCCR1), shown in Figure 9-9, has these functions:
• Stores ninth SCI data bit received and ninth SCI data bit transmitted
• Controls SCI character length
• Controls SCI wakeup method
Address: $000E
Bit 7
6
5
4
3
2
1
Bit 0
Read:
R8
T8
Write:
M
WAKE
Reset: U
U
0
U
U
0
0
0
= Unimplemented
U = Undetermined
Figure 9-9. SCI Control Register 1 (SCCR1)
R8 — Bit 8 (Received)
When the SCI is receiving 9-bit characters, R8 is the ninth bit of the received character. R8 receives
the ninth bit at the same time that the SCDR receives the other eight bits. Resets have no effect on the
R8 bit.
MC68HC05C9A Advance Information Data Sheet, Rev. 5.1
Freescale Semiconductor
59