English
Language : 

MC68HC05C9A Datasheet, PDF (112/124 Pages) Freescale Semiconductor, Inc – Microcontrollers
◁
MC68HSC05C9A
B.3 DC Electrical Characeristics
The data in 12.5 5.0-Volt DC Electrical Characteristics and 12.6 3.3-Volt DC Electrical Characteristics
applies to the MC68HSC05C9A with the exceptions given here.
B.3.1 High-Speed Supply Current
Characteristic(1)
Symbol
Min
Typ
Max Unit
Supply current (4.5–5.5 Vdc @ fBus = 4.0 MHz)
Run(2)
Wait(3)
Stop(4)
25°C
0°C to 70°C (standard)
–40°C to 85°C (standard)
—
7.00
11.0 mA
—
2.00
6.50 mA
IDD
—
1
20
µA
—
1.0
40
µA
—
7.0
50
µA
Supply current (2.4–3.6 Vdc @ fBus = 2.0 MHz)
Run(2)
Wait(3)
Stop(4)
25°C
0°C to 70°C (standard)
–40°C to 85°C (standard)
—
2.50
4.00 mA
—
1.00
2.00 mA
IDD
—
1
8
µA
—
1.0
16
µA
—
2.5
20
µA
1. Typical values reflect measurements taken on average processed devices at the midpoint of voltage range, 25°C only.
2. Run (operating) IDD measured using external square wave clock source; all I/O pins configured as inputs, port B = VDD, all
other inputs VIL = 0.2 V, VIH = VDD–0.2 V; no dc loads; less than 50 pF on all outputs; CL = 20 pF on OSC2
3. Wait IDD measured using external square wave clock source; all I/O pins configured as inputs, Port B = VDD, all other
inputs VIL = 0.2 V, VIH = VDD –0.2 V; no dc loads; less than 50 pF on all outputs; CL = 20 pF on OSC2. Wait IDD is affected
linearly by the OSC2 capacitance
4. Stop IDD measured with OSC1 = 0.2 V; all I/O pins configured as inputs, port B = VDD, all other inputs VIL = 0.2 V,
VIH = VDD–0.2 V
B.3.2 Input Pullup Current
Characteristic
Input pullup current (VDD = 4.5–5.5 V)
PB7–PB0 (with pullup)
Input pullup current (VDD = 2.4–3.6 V)
PB7–PB0 (with pullup)
Symbol
Min
IIn
5
IIn
1
Typ
Max Unit
15
60
µA
5
16
µA
MC68HC05C9A Advance Information Data Sheet, Rev. 5.1
112
Freescale Semiconductor
 ▷