S912XET256J2MAL Datasheet, PDF (628/1324 Pages) Freescale Semiconductor, Inc – MC9S12XEP100 Reference Manual Covers MC9S12XE Family

Chapter 16 Freescale’s Scalable Controller Area Network (S12MSCANV3)
16.3.2.17 MSCAN Identifier Acceptance Registers (CANIDAR0-7)
On reception, each message is written into the background receive buffer. The CPU is only signalled to
read the message if it passes the criteria in the identifier acceptance and identifier mask registers
(accepted); otherwise, the message is overwritten by the next message (dropped).
The acceptance registers of the MSCAN are applied on the IDR0–IDR3 registers (see Section 16.3.3.1,
“Identifier Registers (IDR0–IDR3)”) of incoming messages in a bit by bit manner (see Section 16.4.3,
“Identifier Acceptance Filter”).
For extended identifiers, all four acceptance and mask registers are applied. For standard identifiers, only
the first two (CANIDAR0/1, CANIDMR0/1) are applied.
Module Base + 0x0010 to Module Base + 0x0013
7
R
AC7
W
6
AC6
5
AC5
Reset
0
0
0
4
AC4
0
3
AC3
0
Access: User read/write⁽¹⁾
2
1
0
AC2
AC1
AC0
0
0
0
Figure 16-20. MSCAN Identifier Acceptance Registers (First Bank) — CANIDAR0–CANIDAR3
1. Read: Anytime
Write: Anytime in initialization mode (INITRQ = 1 and INITAK = 1)
Table 16-22. CANIDAR0–CANIDAR3 Register Field Descriptions
Field
Description
7-0
AC[7:0]
Acceptance Code Bits — AC[7:0] comprise a user-defined sequence of bits with which the corresponding bits
of the related identifier register (IDRn) of the receive message buffer are compared. The result of this comparison
is then masked with the corresponding identifier mask register.
Module Base + 0x0018 to Module Base + 0x001B
7
R
AC7
W
6
AC6
5
AC5
Reset
0
0
0
4
AC4
0
3
AC3
0
2
AC2
0
Access: User read/write⁽¹⁾
1
0
AC1
AC0
0
0
Figure 16-21. MSCAN Identifier Acceptance Registers (Second Bank) — CANIDAR4–CANIDAR7
1. Read: Anytime
Write: Anytime in initialization mode (INITRQ = 1 and INITAK = 1)
MC9S12XE-Family Reference Manual Rev. 1.25
628
Freescale Semiconductor