English
Language : 

MC9S08QE16CLC Datasheet, PDF (314/350 Pages) Freescale Semiconductor, Inc – Low-power wireless applications, Gas, water and heater meters
Appendix A Electrical Characteristics and Timing Specifications
A.7 Supply Current Characteristics
Table A-7. Supply Current Characteristics
Num C
Parameter
1
C
Run
supply
3
current
measured
at

(CPU clock = 2 MHz, fBus = 1 MHz)
2
C
Run
supply
5
current
measured
at

(CPU clock = 16 MHz, fBus = 8 MHz)
Symbol
RIDD
RIDD
VDD
(V)
Typ1
5
1.0
3
0.9
5
6.5
3
5.5
Max2
1.34
1.1
8.06
6.5
Unit
Temp
(C)
mA –40 to 125C
mA –40 to 125C
3 P Stop2 mode supply current
S2I
DD
18.0
5 0.900 604
17.0
3 0.720 50
A
–40 to 85C
–40 to 125C
A
–40 to 85C
–40 to 125C
4 P Stop3 mode supply current
S3IDD
20.0
5 0.975 904
19.0
3 0.825 85
A
–40 to 85C
–40 to 125C
A
–40 to 85C
–40 to 125C
5
C RTI adder to stop2 or stop37
5
300
500
500
nA
–40 to 85C
–40 to 125C
S23IDDRTI
3
300
500
500
nA
–40 to 85C
–40 to 125C
5
110
180
A
–40 to 85C
–40 to 125C
6 C LVD adder to stop3 (LVDE = LVDSE = 1) S3I
DDLVD
3
90
160
A
–40 to 85C
–40 to 125C
7
C Adder to stop3 for oscillator enabled8
(OSCSTEN =1)
S3IDDOSC
5,3
5
8
A –40 to 85C
A –40 to 125C
1 Typical values are based on characterization data at 25C unless otherwise stated. See Figure A-5 through Figure A-7 for
typical curves across voltage/temperature.
2 Values given here are preliminary estimates prior to completing characterization.
3 All modules except ADC active, ICG configured for FBE, and does not include any dc loads on port pins
4 Every unit tested to this parameter. All other values in the Max column are guaranteed by characterization.
5 All modules except ADC active, ICG configured for FBE, and does not include any dc loads on port pins
6 Every unit tested to this parameter. All other values in the Max column are guaranteed by characterization.
7 Most customers are expected to find that auto-wakeup from stop2 or stop3 can be used instead of the higher current wait
mode. Wait mode typical is 560 A at 3 V with fBus = 1 MHz.
8 Values given under the following conditions: low range operation (RANGE = 0) with a 32.768kHz crystal, low power mode
(HGO = 0), clock monitor disabled (LOCD = 1).
MC9S08AC60 Series Data Sheet, Rev. 3
314
Freescale Semiconductor