MC9S08SG8 Datasheet, PDF (173/310 Pages) Freescale Semiconductor, Inc – Microcontrollers

SCL1
SCL2
SCL
DELAY
Inter-Integrated Circuit (S08IICV2)
START COUNTING HIGH PERIOD
INTERNAL COUNTER RESET
Figure 11-12. IIC Clock Synchronization
11.4.1.8 Handshaking
The clock synchronization mechanism can be used as a handshake in data transfer. Slave devices may hold
the SCL low after completion of one byte transfer (9 bits). In such case, it halts the bus clock and forces
the master clock into wait states until the slave releases the SCL line.
11.4.1.9 Clock Stretching
The clock synchronization mechanism can be used by slaves to slow down the bit rate of a transfer. After
the master has driven SCL low the slave can drive SCL low for the required period and then release it. If
the slave SCL low period is greater than the master SCL low period then the resulting SCL bus signal low
period is stretched.
MC9S08SG8 MCU Series Data Sheet, Rev. 0
Freescale Semiconductor
PRELIMINARY
173