45111 Datasheet, PDF (25/184 Pages) List of Unclassifed Manufacturers – 14-DAY MONEY BACK GUARANTEE

View List
Clock…
Device…
4 The SX-Key/Blitz Interface
Assembles the source code, and then opens another window that shows the
contents of the list file generated by the assembler. Ctrl-L also displays the list
file. The list file will be described in detail later in this manual (see Chapter 7.10 –
Files Created by SASM).
Opens the clock control dialog box to allow the modification of the clock activity
and frequency. (Not used on the SX-Blitz). Ctrl-K also opens the clock dialog.
With this function, the SX device’s clock is supplied by the SX-Key, and you may
test the functionality of an application at various clock rates.
Opens the device dialog box to allow modification of the SX microcontroller pa-
rameters. Ctrl-I also opens the device dialog box.
Configure…
Opens the configuration dialog box to allow modification of the SX-Key/Blitz
programming interface. See Chapter 4.4.5 – Configure Window for configuration
details. Ctrl-U also performs this operation.
4.3.4 The Help Menu
Contents
Displays information on how to use the WATCH and BREAK directives.
About
Displays the SX-Key/Blitz Development System information box.
4.4 The Windows
Many menu items open up a separate window for further configuration or monitoring. These windows
are described below.
4.4.1 Print Window
The print window is accessed via the Print… item on the File menu. It is the standard Windows Print
dialog box that you know from other applications. It allows you to select which printer shall be used,
and depending on the printer type, various options can be selected.
SX-Key/Blitz Development System Manual 2.0 • Parallax, Inc. • Page 25