LM3S8962 Datasheet, PDF (578/620 Pages) List of Unclassifed Manufacturers – Microcontroller

Electrical Characteristics
Table 24-4. Detailed Power Specifications
Parameter Parameter
Name
Conditions
I_{DD_RUN}
Run mode 1
(Flash loop)
V_DD25 = 2.50 V
Code= while(1){} executed in
Flash
3.3 V V_DD, V_DDA, 2.5 V V_DD25
V_DDPHY
3.0 V V_BAT Unit
Nom Max Nom Max Nom Max
48 pending^a 108 pending^a 0 pending^a mA
Peripherals = All ON
Run mode 2
(Flash loop)
System Clock = 50 MHz (with
PLL)
V_DD25 = 2.50 V
Code= while(1){} executed in
Flash
5 pending^a 52 pending^a 0 pending^a mA
Peripherals = All OFF
Run mode 1
(SRAM loop)
System Clock = 50 MHz (with
PLL)
V_DD25 = 2.50 V
Code= while(1){} executed in
SRAM
48 pending^a 100 pending^a 0 pending^a mA
Peripherals = All ON
Run mode 2
(SRAM loop)
System Clock = 50 MHz (with
PLL)
V_DD25 = 2.50 V
Code= while(1){} executed in
SRAM
5 pending^a 45 pending^a 0 pending^a mA
Peripherals = All OFF
I_{DD_SLEEP} Sleep mode
System Clock = 50 MHz (with
PLL)
V_DD25 = 2.50 V
Peripherals = All OFF
5 pending^a 16 pending^a 0 pending^a mA
I_{DD_DEEPSLEEP} Deep-Sleep
mode
System Clock = 50 MHz (with
PLL)
LDO = 2.25 V
Peripherals = All OFF
4.6 pending^a 0.21 pending^a 0 pending^a mA
I_{DD_HIBERNATE} Hibernate
mode
System Clock = IOSC30KHZ/64
V_BAT = 3.0 V
0 pending^a 0 pending^a 16 pending^a µA
V_DD = 0 V
V_DD25 = 0 V
V_DDA = 0 V
V_DDPHY = 0 V
Peripherals = All OFF
System Clock = OFF
Hibernate Module = 32 kHz
a. Pending characterization completion.
578
September 02, 2007
Preliminary