CO4011A-FL Datasheet, PDF (28/37 Pages) List of Unclassifed Manufacturers – Single Chip CANopen Controller for Remote I/O

CO4011A-FL
Single Chip CANopen Controller for Remote I/O
Index 2FFB : Power-Down-Delay-Time
Power-Down-Delay-Time
After reception of Power-Down instruction the
CO4011 waits for the period Power-Down Delay
Time and than switches over in Power-Down-Mode.
The time is given in milliseconds.
The access is done by SDO.
Index
2FFB
Name
Power-Down-Delay-Time
Description -
Data Type
Unsigned 16
Access modes RW
PDO Mapping NO
Value Range 0 .. 20000
Default Value 500
Index 2FFC : Wake-Up-Counter
Wake-Up-Counter
The Wake Up Counter counts all wake up events of
Power-Down-Mode. The access to the counter is
done by SDO.
Index
2FFC
Name
Wake-Up-Counter
Description -
Data Type
Unsigned 32
Access modes RW
PDO Mapping YES
Value Range -
Default Value 0
Index 2FFD :
Reset Power Down Input Pin Enable
Enable "Reset Power Down Input"
Reset Power Down Input is configured by writing the
value 0x5250454E ("RPEN") to this object. As soon
as this signature will be written pin1 (IN9) is used as
Reset Power Down Input (RPDI). Then it cannot be
used as digital input line any more.
Index
2FFD
Name
Reset Power Down Input Enable
Description -
Data Type
Unsigned 32
Access modes RW
PDO Mapping NO
Value Range -
Default Value 0
Index 2FFE : Power-Down-Enable
Power-Down-Enable
The use of Power-Down-Mode is enabled by writing
the value 0x5044454E ("PDEN") to this object. As
soon as this signature will be written, pin2 (IN8) is
configured as Wake-Up-Interrupt-Input (WUII). Then
it cannot be used as digital input pin any more. The
correct signature is the requirement for acceptance
of all further power down instructions.
Index
2FFE
Name
Power-Down-Enable
Description -
Data Type
Unsigned 32
Access modes RW
PDO Mapping NO
Value Range -
Default Value 0
frenzel + berg elektronik – Maximilianstr. 28 – 89231 Neu-Ulm – Germany - phone [phone] - fax [phone] – www.frenzel-berg.de
Page 28 of 28
Revision 1.39
May/19/2003