T32UC3L0128_14 Datasheet, PDF (788/852 Pages) ATMEL Corporation – Compact Single-cycle RISC Instruction Set Including DSP Instructions

32145C–06/2013
AT32UC3L0128/256
1. 0x55 (sync)
2. 0xC1 (command)
3. 0x00 (length MSB)
4. 0x07 (length LSB)
5. 0xCA (Data MSB)
6. 0xFE
7. 0xBA
8. 0xBE (Data LSB)
9. 0x00 (Status byte)
10. 0x00 (Bytes remaining MSB)
11. 0x00 (Bytes remaining LSB)
12. 0xXX (CRC MSB)
13. 0xXX (CRC LSB)
The status is 0x00 and all data read are valid. An unsuccessful four byte read can look like this:
1. 0x55 (sync)
2. 0xC1 (command)
3. 0x00 (length MSB)
4. 0x07 (length LSB)
5. 0xCA (Data MSB)
6. 0xFE
7. 0xXX (An error has occurred. Data read is undefined. 5 bytes remaining of the Data
field)
8. 0xXX (More undefined data)
9. 0x02 (Status byte)
10. 0x00 (Bytes remaining MSB)
11. 0x05 (Bytes remaining LSB)
12. 0xXX (CRC MSB)
13. 0xXX (CRC LSB)
The error occurred after reading 2 bytes on the SAB. The rest of the bytes read are undefined.
The status byte indicates the error and the bytes remaining indicates how many bytes were
remaining to be sent of the data field of the packet when the error occurred.
Table 31-53. MEMDATA Status Byte
status byte
Description
0x00
Read successful
0x01
SAB busy
0x02
Bus error (wrong address)
Other
Reserved
Table 31-54. MEMDATA Details
Response
Response value
Additional data
Details
0xC1
Data read, status byte, and byte count (2 bytes)
788