AK7744VT Datasheet, PDF (36/50 Pages) Asahi Kasei Microsystems – 24bit 3ch ADC + 24bit 4ch DAC with Audio DSP

[ASAHI KASEI]
[AK7744]
7-2) Read during reset phase
7-2-a) Control register data read (during reset phase)
To read data written into the control registers, input the command code and 16 bits of SCLK. After the input
command code, the data of D7 to D1 outputs from SO is synchronized with the falling edge of SCLK. D0 is invalid,
so please ignore this bit.
Data transfer procedure
c Command code 70h,74h,78h,7Ch
S_RESET
RQ
SCLK
SI
SO
70h (example)
D7 **** D1
74h (example)
D7 **** D1
Reading of Control Register data
<MS0167-E-00>
- 36 -
2002/10