EVAL-ADPD105Z-GEN Datasheet, PDF (4/26 Pages) Analog Devices – Supports the detection of UART

UG-1021
USB UNIVERSAL ASYNCHRONOUS
RECEIVER/TRANSMITTER (UART) CONNECTION
After the application opens, select File > Connect (see Figure 6).
From the drop-down menu, select either Auto Connect or
Select Port, depending on if the specific COM port selection is
necessary.
EVAL-ADPD105Z-GEN User Guide
If a specific COM port selection is not needed, select Auto
Connect to automatically connect the ADPD103_ADPD105
OpenMarket WaveTool to the device.
Choose Select Port to connect the ADPD103_ADPD105
OpenMarket WaveTool to the device via a particular COM port,
shown in Figure 7.
Figure 6. UART Connect
Figure 7. Port Selection
Rev. 0 | Page 4 of 26