|
EVAL-ADPD105Z-GEN Datasheet, PDF (21/26 Pages) Analog Devices – Supports the detection of UART | |||
|
◁ |
EVAL-ADPD105Z-GEN User Guide
Write Register
After connecting the port following the instructions in the Port
Connection section, send the register write command as 00 03
<reg address> <Value>, for example, send as 00 03 01 00 01
(see Figure 63).
UG-1021
The following are the defined write command components:
⢠00 = register write command
⢠03 = number of parameters
⢠01 = register address
⢠00 01 = register value
The response is received with the register value.
Figure 63. Write Register Operation
Rev. 0 | Page 21 of 26
|
▷ |