W29GL256SH9T-TR Datasheet, PDF (62/88 Pages) Winbond – 256M-BIT 3.0-VOLT PARALLEL FLASH MEMORY WITH PAGE MODE

W29GL256S
9 ELECTRICAL SPECIFICATIONS
9.1 Absolute Maximum Ratings
Table 9-1 Absolute Maximum Ratings
PARAMETER
VCC
EVIO
All pins other than #RESET¹
#RESET¹
Output Short Circuit Current²
Storage Temperature Plastic Packages
Ambient Temperature with Power Applied
Voltage with Respect to Ground
Values
-0.5V to +4.0V
-0.5V to +4.0V
-0.5V to (EVIO + 0.5V)
-0.5V to (VCC + 0.5V)
100 mA
-65°C to +150°C
-65°C to +125°C
Notes:
1. During signal transitions the I/O or input pins can undershoot VSS to a maximum of -2.0V or overshoot to a
maximum of VCC +2.0V for periods of up to 20 ns. See Maximum Negative Overshoot Waveform and Maximum
Positive Overshoot Waveform. Minimum DC voltage on input or I/O pins is -0.5V and the Maximum DC voltage is
VCC +0.5V.
2. Duration of an output short circuit should not be greater than one second and more than one output may be
shorted to ground at a time.
3. Permanent damage to the device can be cause by stressing the device above those listed under Absolute
Maximum Ratings. Device reliability may be affected by operating the device at Absolute Maximum Ratings for a
prolonged period of time.
9.1.1 Input Signal Overshoot
Figure 9-1 Max Negative Overshoot Waveform
Vss
20ns
20ns
Figure 9-2 Positive Overshoot Waveform
20ns
Vcc +2.0V
Vss -2.0V
20ns
Vcc
20ns
20ns
Publication Release Date: Jul 02, 2014
Revision C
62