W29GL256SH9T-TR Datasheet, PDF (27/88 Pages) Winbond – 256M-BIT 3.0-VOLT PARALLEL FLASH MEMORY WITH PAGE MODE

W29GL256S
4=1), because of the Write Buffer Abort Status Bit (Bit 3) equals 1. A Clear Status Register command
may be issued to clear the Program Status Bit or the next successful program operation will clear the
failure status bit.
Caution should be taken when stopping the Write Buffer Programming Sequence by the following
methods: Power cycling the device or a Hardware Reset. Using either of these methods may leave
the area being programmed in an unknown state with unstable or invalid data. If this is the case
reprogrammed with the same data or performing an erased to ensure data values are properly
programmed or erased.
Publication Release Date: Jul 02, 2014
Revision C
27