W948D6FBHX5E-TR Datasheet, PDF (31/60 Pages) Winbond – 256Mb Mobile LPDDR

W948D6FB / W948D2FB
256Mb Mobile LPDDR
7.5.7 Random Read Bursts
Full-speed random read accesses within a page or pages can be performed as shown in following figure.
CK
CK
Command
READ
READ
READ
READ
NOP
NOP
Address BA,Col n
DQS
BA,Col x
CL=2
BA,Col b
BA,Col g
DQ
DQS
DO n DO n' DO x DO x' DO b DO b'
CL=3
DO g DO g'
DQ
DO n DO n' DO x DO x' DO b DO b'
1) DO n ,etc. = Data Out from column n, etc.
n', x', etc. = Data Out elements, according to the programmed burst order
2) BA, Col n = Bank A, Column n
3) Burst Length=2,4,8 or 16 in cases shown (if burst of 4,8 or 16, the burst is interrupted)
4) Reads are to active rows in any banks
= Don't Care
7.5.8 Read Burst Terminate
Data from any READ burst may be truncated with a BURST TERMINATE command, as shown in figure. The BURST
TERMINATE latency is equal to the read (CAS) latency, i.e., the BURST TERMINATE command should be issued X
cycles after the READ command where X equals the desired data-out element pairs.
CK
CK
Command
READ
BST
NOP
NOP
NOP
NOP
Address BA,Col n
DQS
CL=2
DQ
DQS
CL=3
DQ
1) DO n = Data Out from column n
2) BA,Col n = Bank A, Column n
3) Cases shown are bursts of 4,8 or 16 terminated after 2 data elements.
4) Shown with nominal tAC, tDQSCK and tDQSQ
= Don't Care
- 31 -
Publication Release Date : Oct, 15, 2012
Revision : A01-004