DS90UH925Q Datasheet, PDF (44/47 Pages) Texas Instruments – 720p 24-bit Color FPD-Link III Serializer with HDCP

DS90UH925Q
Revision
• March 7, 2012
— Corrected under “Recommended Operating Conditions” from RxCLKIN Frequency to PCLK Frequency
— Added under “AC Electrical Characteristics: min. limit t_IJIT = 0.4UI at 78MHz
— Deleted under “DC Electrical Characteristics” PDB VDDIO = 1.71 to 1.89V
— Deleted under “DC Electrical Characteristics “V_OS Min and Max limits”
— Added “INTERRUPT PIN — FUNCTIONAL DESCRIPTION AND USAGE (INTB)” under Functional Description section
— Updated "POWER DOWN (PDB)” description under Functional Description from VDDIO to VDDIO = 3.0 to 3.6V or V_DD33
— Updated “FIGURE 21. Typical Connection Diagram”
• Aug 6, 2012
— Converted to hybrid TI format
— Corrected typo in Pin Descriptions SCL Pin # from 6 to 8
— Corrected typo in Pin Descriptions SDA Pin # from 7 to 9
— Corrected typo in TABLE 1: Configuration Select (MODE_SEL) #6 I2S Channel B (18–bit Mode) from L to H
— Corrected typo in TABLE 5. Serial Control Bus Addresses for IDx #11 Ideal V_R2(V) from 2.475 to 1.475
— Added “Note: BIST is not available in backwards compatible mode.”
— Corrected typo in table “DC and AC Serial Control Bus Characteristics” from VDDIO to VDD33
— Added” Note: frequency range = 15 - 65MHz when LFMODE = 0 and frequency range = 5 - <15MHz when LFMODE = 1.”
under Functional Description. Reformatted TABLE 1 and added clarification to notes. Added clarification to notes on TABLE
6 Serial Control Bus Registers, address 0x04[3:0] (backwards compatible and LFMODE registers).
44
Copyright © 1999-2012, Texas Instruments Incorporated