AM1707_14 Datasheet, PDF (39/201 Pages) Texas Instruments – Microprocessor

www.ti.com
AM1707
SPRS637E – FEBRUARY 2010 – REVISED JUNE 2014
5.4 Notes on Recommended Power-On Hours (POH)
The information in the section below is provided solely for your convenience and does not extend or
modify the warranty provided under TI’s standard terms and conditions for TI semiconductor products.
To avoid significant degradation, the device power-on hours (POH) must be limited to the following:
Table 5-1. Recommended Power-On Hours
Silicon Revision
D
D
D
D
D
Speed Grade
375 MHz
375 MHz
375 MHz
456 MHz
456 MHz
Operating Junction
Temperature (Tj)
0 to 90 °C
-40 to 105 °C
-40 to 125 °C
0 to 90 °C
-40 to 90 °C
Nominal CVDD Voltage (V)
1.2V
1.2V
1.2V
1.3V
1.3V
(1) 100,000 POH can be achieved at this temperature condition if the device operation is limited to 345 MHz.
Power-On Hours [POH]
(hours)
100,000
75,000 ⁽¹⁾
20,000
100,000
100,000
Note: Logic functions and parameter values are not assured out of the range specified in the recommended
operating conditions.
The above notations cannot be deemed a warranty or deemed to extend or modify the warranty under
TI’s standard terms and conditions for TI semiconductor products.
Copyright © 2010–2014, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: AM1707
Device Operating Conditions
39