LM3S828 Datasheet, PDF (19/526 Pages) Texas Instruments – ARM and Thumb are registered trademarks and Cortex is a trademark

Stellaris^® LM3S828 Microcontroller
Revision History
The revision history table notes changes made between the indicated revisions of the LM3S828
data sheet.
Table 1. Revision History
Date
June 2012
Revision Description
12739.2515 ■ In Reset Characteristics table, changed values and units for Internal reset timeout after hardware
reset (R7).
■ Removed 48QFN package.
■ Removed extended temperature package.
■ Minor data sheet clarifications and corrections.
November 2011
11107
■ Added module-specific pin tables to each chapter in the new Signal Description sections.
■ In Timer chapter, clarified that in 16-Bit Input Edge Time Mode, the timer is capable of capturing
three types of events: rising edge, falling edge, or both.
■ In UART chapter, clarified interrupt behavior.
■ In SSI chapter, corrected SSIClk in the figure "Synchronous Serial Frame Format (Single Transfer)".
■ In Signal Tables chapter:
– Corrected pin numbers in table "Connections for Unused Signals" (other pin tables were correct).
■ In Electrical Characteristics chapter:
– Added parameter "Input voltage for a GPIO configured as an analog input" to the "Maximum
Ratings" table.
– Corrected Nom values for parameters "TCK clock Low time" and "TCK clock High time" in "JTAG
Characteristics" table.
■ Additional minor data sheet clarifications and corrections.
June 18, 2012
19
Texas Instruments-Production Data