LSM303AGR Datasheet, PDF (57/68 Pages) STMicroelectronics – ultra-low-power 3D accelerometer and 3D magnetometer

LSM303AGR
Register description
D[6:0]
Table 73. INT2_DURATION_A description
Duration value. Default value: 000 0000
1 LSb = 1/ODR⁽¹⁾
1. Duration time is measured in N/ODR, where N is the content of the duration register.
The D[6:0] bits set the minimum duration of the Interrupt 2 event to be recognized. Duration
time steps and maximum values depend on the ODR chosen.
8.27 CLICK_CFG_A (38h)
Table 74. CLICK_CFG_A register
--
--
ZD
ZS
YD
YS
XD
XS
Table 75. CLICK_CFG_A description
ZD
Enable interrupt double-click on Z-axis. Default value: 0
(0: disable interrupt request; 1: enable interrupt request on measured accel. value
higher than preset threshold)
ZS
Enable interrupt single-click on Z-axis. Default value: 0
(0: disable interrupt request; 1: enable interrupt request on measured accel. value
higher than preset threshold)
YD
Enable interrupt double-click on Y-axis. Default value: 0
(0: disable interrupt request; 1: enable interrupt request on measured accel. value
higher than preset threshold)
YS
Enable interrupt single-click on Y-axis. Default value: 0
(0: disable interrupt request; 1: enable interrupt request on measured accel. value
higher than preset threshold)
XD
Enable interrupt double-click on X-axis. Default value: 0
(0: disable interrupt request; 1: enable interrupt request on measured accel. value
higher than preset threshold)
XS
Enable interrupt single-click on X-axis. Default value: 0
(0: disable interrupt request; 1: enable interrupt request on measured accel. value
higher than preset threshold)
DocID027765 Rev 5
57/68
68