LSM303AGR Datasheet, PDF (45/68 Pages) STMicroelectronics – ultra-low-power 3D accelerometer and 3D magnetometer

LSM303AGR
8
Register description
Register description
8.1
STATUS_REG_AUX_A (07h)
Table 26. STATUS_REG_AUX register
--
TOR
--
--
--
TDA
--
--
TOR
TDA
Table 27. STATUS_REG_AUX description
Temperature data overrun. Default value: 0
(0: no overrun has occurred;
1: new temperature data has overwritten the previous data)
Temperature new data available. Default value: 0
(0: new temperature data is not yet available;
1: new temperature data is available)
8.2
OUT_TEMP_L_A (0Ch), OUT_TEMP_H_A (0Dh)
Temperature sensor data. Refer to Section 4.5: Temperature sensor for details on how to
enable and read the temperature sensor output data.
8.3
INT_COUNTER_REG_A (0Eh)
Table 28. INT_COUNTER_REG register
IC7
IC6
IC5
IC4
IC3
IC2
IC1
IC0
8.4
WHO_AM_I_A (0Fh)
Table 29. WHO_AM_I register
0
0
1
1
0
0
1
1
Device identification register.
8.5
TEMP_CFG_REG_A (1Fh)
Table 30. TEMP_CFG_REG register
TEMP_EN1 TEMP_EN0
0
0
0
0
0
0
TEMP_EN[1:0]
Table 31. TEMP_CFG_REG description
Temperature sensor (T) enable. Default value: 00
(00: T disabled; 11: T enabled)
DocID027765 Rev 5
45/68
68