LSM303AGR Datasheet, PDF (52/68 Pages) STMicroelectronics – ultra-low-power 3D accelerometer and 3D magnetometer

Register description
LSM303AGR
8.19 INT1_CFG_A (30h)
AOI 6D ZHIE/
ZUPE
Table 56. INT1_CFG_A register
ZLIE/
ZDOWNE
YHIE/
YUPE
YLIE/
YDOWNE
XHIE/
XUPE
XLIE/
XDOWNE
Table 57. INT1_CFG_A description
AOI
And/Or combination of interrupt events. Default value: 0. Refer to Table 58.
6D
6-direction detection function enabled. Default value: 0. Refer to Table 58.
ZHIE/
ZUPE
Enable interrupt generation on Z high event or on direction recognition. Default value: 0
(0: disable interrupt request;1: enable interrupt request)
ZLIE/
Enable interrupt generation on Z low event or on direction recognition. Default value: 0
ZDOWNE (0: disable interrupt request;1: enable interrupt request)
YHIE/
YUPE
Enable interrupt generation on Y high event or on direction recognition. Default value: 0
(0: disable interrupt request; 1: enable interrupt request.)
YLIE/
Enable interrupt generation on Y low event or on direction recognition. Default value: 0
YDOWNE (0: disable interrupt request; 1: enable interrupt request.)
XHIE/
XUPE
Enable interrupt generation on X high event or on direction recognition. Default value: 0
(0: disable interrupt request; 1: enable interrupt request.)
XLIE/
Enable interrupt generation on X low event or on direction recognition. Default value: 0
XDOWNE (0: disable interrupt request; 1: enable interrupt request.)
The content of this register is loaded at boot.
A write operation to this address is possible only after system boot.
52/68
DocID027765 Rev 5