LSM303C Datasheet, PDF (50/53 Pages) –

Package information
9
Package information
LSM303C
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK^® packages, depending on their level of environmental compliance. ECOPACK^®
specifications, grade definitions and product status are available at: www.st.com.
ECOPACK is an ST trademark.
Table 93. LGA-12 2x2x1 mm mechanical dimensions (see note 1 and 2)
Databook
Symbol
Min.
Typ.
Max.
Note
Ó¨
-
45°
-
A
-
-
1.00
A1
0.00
-
0.05
4
A2
-
0.13
-
b
-
0.25
-
7
D
2.00
6
E
2.00
6
e
0.50
e1
1.50
h
-
0.075
-
L
-
0.275
-
7
L1
-
0.10
-
N
12
5
Note:
50/53
Symbol
D/E
Notes
REF
Tolerance of Form and Position
Databook
0.15
1 and 2
-
Δ
1. Dimensioning and tolerancing schemes conform to ASME Y14.5M-1994.
2. All dimensions are in millimeters.
3. The "Pin 1 Indicator" is identified on top and/or bottom surfaces of the package.
4. A1 is defined as the distance from the seating plane to the land.
5. "N" is the maximum number of terminal positions for the specified body size.
6. The tolerance of the typical value is specified in the table "Tolerance of Form and
Position".
7. Dimensions "b" and "L" are specified:
For solder mask defined: at terminal plating surface
For non-solder mask defined: at solder mask opening
DocID024975 Rev 2