LSM303C Datasheet, PDF (16/53 Pages) –

Module specifications
LSM303C
2.5
Note:
Absolute maximum ratings
Stresses above those listed as “absolute maximum ratings” may cause permanent damage
to the device. This is a stress rating only and functional operation of the device under these
conditions is not implied. Exposure to maximum rating conditions for extended periods may
affect device reliability.
Table 8. Absolute maximum ratings
Symbol
Ratings
Maximum value Unit
Vdd Supply voltage
-0.3 to 4.8
V
Vdd_IO I/O pins supply voltage
-0.3 to 4.8
V
Input voltage on any control pin
Vin
(CS_XL, CS_MAG, SCL/SPC, SDA/SDI/SDO)
-0.3 to Vdd_IO +0.3 V
A_POW Acceleration (any axis, powered, Vdd = 2.5 V)
3000 for 0.5 ms
g
10000 for 0.1 ms
g
A_UNP Acceleration (any axis, unpowered)
3000 for 0.5 ms
g
10000 for 0.1 ms
g
M_EF
T_OP
T_STG
ESD
Maximum exposed field
Operating temperature range
Storage temperature range
Electrostatic discharge protection (HBM)
1000
-40 to +85
-40 to +125
2
gauss
°C
°C
kV
Supply voltage on any pin should never exceed 4.8 V
This device is sensitive to mechanical shock, improper handling can cause
permanent damage to the part
This device is sensitive to electrostatic discharge (ESD), improper handling can
cause permanent damage to the part
16/53
DocID024975 Rev 2