LSM303C Datasheet, PDF (38/53 Pages) –

Register description
LSM303C
Table 41. STATUS_REG_A register description (continued)
YOR
Y-axis data overrun. Default value: 0
(0: no overrun has occurred; 1: new data for the Y-axis has overwritten the
previous data)
XOR
X-axis data overrun. Default value: 0
(0: no overrun has occurred; 1: new data for the X-axis has overwritten the
previous data)
ZYXDA X, Y and Z-axis new data available. Default value: 0
(0: a new set of data is not yet available; 1: a new set of data is available)
ZDA
Z-axis new data available. Default value: 0
(0: new data for the Z-axis is not yet available; 1: new data for the Z-axis is available)
YDA
Y-axis new data available. Default value: 0
(0: new data for the Y-axis is not yet available; 1: new data for the Y-axis is available)
XDA
X axis new Data Available. Default value: 0
(0: new data for the X-axis is not yet available; 1: new data for the X-axis is available)
8.12
OUT_X_L_A (28h), OUT_X_H_A (29h)
Accelerometer x-axis output register (r)
Table 42. OUT_X_L_A register default values
0
0
0
0
0
0
0
0
Table 43. OUT_X_H_A register default values
0
0
0
0
0
0
0
0
8.13
OUT_Y_L_A (2Ah), OUT_Y_H_A (2Bh)
Accelerometer y-axis output register (r)
Table 44. OUT_Y_L_A register default values
0
0
0
0
0
0
0
0
Table 45. OUT_Y_H_A register default values
0
0
0
0
0
0
0
0
8.14
OUT_Z_L_A (2Ch), OUT_Z_H_A (2Dh)
Accelerometer z-axis output register (r)
Table 46. OUT_Z_L_A register default values
0
0
0
0
0
0
0
0
Table 47. OUT_Z_H_A register default values
0
0
0
0
0
0
0
0
38/53
DocID024975 Rev 2