COM20019I_0610 Datasheet, PDF (11/70 Pages) SMSC Corporation – Cost Competitive ARCNET (ANSI 878.1) Controller with 2K x 8 On-Chip RAM

Cost Competitive ARCNET (ANSI 878.1) Controller with 2K x 8 On-Chip RAM
Reconfigure
Timer has
Timed Out
Power On
Send
Reconfigure
Burst
Read Node ID
Write ID to
RAM Buffer
1
Set NID=ID
Start
Reconfiguration
Timer (6.72 S)*
Y
Invitation
N
to Transmit to
this ID?
N
Y
TA?
Broadcast?
N
Y
Send
Packet
Transmit
NAK
Transmit
ACK
Y
Was Packet
Broadcast?
Y
Free Buffer
Enquiry to
this ID?
Y
N
RI?
N
Y
N
SOH?
Y
N
RI?
Write SID
to Buffer
Transmit
Free Buffer
Enquiry
No
Activity
Y
DID ^Y
=0?
N for 597.6
Y
N ^us?
N
Broadcast ^N
ACK?
DID
Enabled?
Y
N
NAK?
Set TA
=ID?
YN
Y
1
Write Buffer
N
with Packet
No
Activity
Y
for 597.6
us?
N
N
Y
ACK?
Set TA
Pass the
Token
Figure 3.1 - COM20019I 3V OPERATCIROC N N
Increment
NID
Y
No
Activity
for 597.6
N
OK?
Y
Set TMA
us?
LENGTH ^N
OK?
Y
- _{ID refers to the identification number of the ID assigned to this node.}
- NID refers to the next identification number that receives the token
after this ID passes it.
- _{SID refers to the source identification.}
- DID refers to the destination identification.
- SOH refers to the start of header character; preceeds all data packets.
* Reconfig timer is programmable via setup2 register bits 1, 0.
Note - All time values are valid for 312.5 Kbps.
Y
DID
=0?
N
DID ^N
=ID?
Y
SEND ACK
Set RI
No Activity ^N
for 656
uS?
Y
Set NID=ID
Start Timer:
T=(255-ID)
x 1.168 mS
Activity Y
On Line?
N
N
T=0?
Y
SMSC COM20019I 3.3V Rev.C
Page 11
DATASHEET
Rev. 10-31-06