|
LAN9730 Datasheet, PDF (1/61 Pages) SMSC Corporation – High-Speed Inter-Chip (HSIC) USB 2.0 | |||
|
LAN9730/LAN9730i
High-Speed Inter-Chip (HSIC) USB 2.0
to 10/100 Ethernet Controller
PRODUCT FEATURES
Highlights
ï® Single Chip HSIC USB 2.0 to 10/100 Ethernet
Controller
ï® Integrated 10/100 Ethernet MAC with Full-Duplex
Support
ï® Integrated 10/100 Ethernet PHY with HP Auto-MDIX
Support
ï® Integrated USB 2.0 Hi-Speed Device Controller
ï® Integrated HSIC Interface
ï® Implements Reduced Power Operating Modes
Target Applications
ï® Embedded Systems
ï® Set-Top Boxes
ï® PVRs
ï® CE Devices
ï® Networked Printers
ï® USB Port Replicators
ï® Test Instrumentation
ï® Industrial
Key Features
ï® USB Device Controller
â Fully compliant with Hi-Speed Universal Serial Bus
Specification, revision 2.0
â Supports HS (480 Mbps) mode
â Four Endpoints supported
â Supports vendor specific commands
â Integrated HSIC Interface
â Remote wakeup supported
ï® High-Performance 10/100 Ethernet Controller
â Fully compliant with IEEE 802.3/802.3u
â Integrated Ethernet MAC and PHY
â 10BASE-T and 100BASE-TX support
â Full- and half-duplex support
â Full- and half-duplex flow control
â Preamble generation and removal
â Automatic 32-bit CRC generation and checking
â Automatic payload padding and pad removal
â Loop-back modes
â TCP/UDP/IP/ICMP checksum offload support
Datasheet
â Flexible address filtering modes
â One 48-bit perfect address
â 64 hash-filtered multicast addresses
â Pass all multicast
â Promiscuous mode
â Inverse filtering
â Pass all incoming with status report
â Wakeup packet support
â Integrated Ethernet PHY
â Auto-negotiation
â Automatic polarity detection and correction
â HP Auto-MDIX support
â Link status change wake-up detection
â Support for three status LEDs
â External MII and Turbo MII support HomePNA® and
HomePlug® PHY
ï® Power and I/Os
â Various low power modes
â Supports PCI-like PME wake when USB Host disabled
â 11 GPIOs
â Supports bus-powered and self-powered operation
â Integrated power-on reset circuit
â Single external 3.3 V I/O supply
â Optional internal core regulator
ï® Miscellaneous Features
â EEPROM controller
â Supports custom operation without EEPROM
â IEEE 1149.1 (JTAG) boundary scan
â Requires single 25 MHz crystal
ï® Software
â Windows® 8/7/XP/Vista driver
â Linux® driver
â Win CE driver
â MAC® OS driver
â EEPROM utility
ï® Packaging
â 56-pin QFN (8 x 8 mm) lead-free, RoHS compliant
ï® Environmental
â Commercial Temperature Range (0°C to +70°C)
â Industrial Temperature Range (-40°C to +85°C)
SMSC LAN9730/LAN9730i
DATASHEET
Revision 1.1 (05-13-13)
|
▷ |