English
Language : 

SI5375 Datasheet, PDF (53/54 Pages) Silicon Laboratories – 4-PLL ANY-FREQUENCY PRECISION CLOCK MULTIPLIER/JITTER ATTENUATOR
DOCUMENT CHANGE LIST
Revision 0.16 to Revision 0.2
Improved the Functional Block Diagram.
Added specifications for different output
formats.
Added 1.8 V operation.
Added 40 MHz reference oscillator.
Corrected Figure 11 title.
Added comments to BYPASS and SFOUT
registers.
Revision 0.2 to Revision 0.3
Expanded and improved the specification
tables.
Added comments on when a heat sink is
required.
Revision 0.3 to Revision 0.4
Added Silicon Labs logo to device top mark
Revision 0.4 to Revision 0.41
Corrected Register Map numbering.
Removed Register 185.
Revision 0.41 to Revision 0.45
Added comments indicating that a crystal may
not be used in place of an external oscillator.
Updated specification Tables 3, 4, and 5.
Added maximum jitter specifications to Table 5.
Added Thermal Characteristics table on
page 12.
Added Figure 3, “Typical Application
Schematic,” on page 13.
Added "5. Si5375 Application Examples and
Suggestions" on page 16.
Updated "7. Register Descriptions" on page 21.
Added a part number for the non-RoHS6 device
to "9. Ordering Guide" on page 48.
Added recommendations on the four reset pins
in "5.4. RSTL_x Pins" on page 16.
Added Lead-Finish top marking.
Revision 0.45 to Revision 1.0
Updated " Features" on page 1.
Minor corrections to Tables 2, 3, and 5.
Rev. 1.0
Si5375
53