M16C6C Datasheet, PDF (78/94 Pages) Renesas Technology Corp – RENESAS MCU

M16C/6C Group
5. Electrical Characteristics
V_CC1 = V_CC2 = 3 V
5.3.2 Timing Requirements (Peripheral Functions and Others)
(V_CC1 = V_CC2 = 3 V, V_SS = 0 V, at T_opr = -20 to 85°C/-40 to 85°C unless otherwise specified)
Table 5.41 External Clock Input (XIN Input) ⁽¹⁾
Symbol
Parameter
t_c
t_w(H)
t_w(L)
t_r
t_f
External clock input cycle time
External clock input high pulse width
External clock input low pulse width
External clock rise time
External clock fall time
Note:
1. The condition is V_CC1 = V_CC2 = 2.7 to 3.0 V.
Table 5.42
Symbol
t_c(TA)
t_w(TAH)
t_w(TAL)
Timer A Input (Counter Input in Event Counter Mode)
Parameter
TAiIN input cycle time
TAiIN input high pulse width
TAiIN input low pulse width
Standard
Min.
Max.
50
20
20
9
9
Standard
Min.
Max.
150
60
60
Unit
ns
ns
ns
ns
ns
Unit
ns
ns
ns
Table 5.43 Timer A Input (Gating Input in Timer Mode)
Symbol
t_c(TA)
t_w(TAH)
t_w(TAL)
Parameter
TAiIN input cycle time
TAiIN input high pulse width
TAiIN input low pulse width
Standard
Unit
Min.
Max.
600
ns
300
ns
300
ns
Table 5.44 Timer A Input (External Trigger Input in One-Shot Timer Mode)
Symbol
t_c(TA)
t_w(TAH)
t_w(TAL)
Parameter
TAiIN input cycle time
TAiIN input high pulse width
TAiIN input low pulse width
Standard
Unit
Min.
Max.
300
ns
150
ns
150
ns
Table 5.45 Timer A Input (External Trigger Input in Pulse Width Modulation Mode)
Symbol
t_w(TAH)
t_w(TAL)
Parameter
TAiIN input high pulse width
TAiIN input low pulse width
Standard
Unit
Min.
Max.
150
ns
150
ns
Table 5.46 Timer A Input (Two-Phase Pulse Input in Event Counter Mode)
Symbol
Parameter
Standard
Unit
Min.
Max.
t_c(TA)
t_{su(TAIN-TAOUT)}
t_{su(TAOUT-TAIN)}
TAiIN input cycle time
TAiOUT input setup time
TAiIN input setup time
2
μs
500
ns
500
ns
REJ03B0277-0100 Rev.1.00 Jul.15, 2009
Page 76 of 90