M16C6C Datasheet, PDF (59/94 Pages) Renesas Technology Corp – RENESAS MCU

M16C/6C Group
5. Electrical Characteristics
5.2 Electrical Characteristics (V_CC1 = V_CC2 = 5 V)
5.2.1 Electrical Characteristics
Table 5.19 Electrical Characteristics (1) ^{(1, 2)}
Symbol
Parameter
V_OH High output P6_0 to P6_7, P7_2 to P7_7, P8_0 to P8_4,
voltage P8_6, P8_7, P9_0 to P9_7, P10_0 to P10_7
P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7,
P3_0 to P3_7, P4_0 to P4_7, P5_0 to P5_7
V_OH High output P6_0 to P6_7, P7_2 to P7_7, P8_0 to P8_4,
voltage P8_6, P8_7, P9_0 to P9_7, P10_0 to P10_7
P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7,
P3_0 to P3_7, P4_0 to P4_7, P5_0 to P5_7
V_OH High output voltage XOUT
HIGHPOWER
LOWPOWER
High output voltage XCOUT HIGHPOWER
LOWPOWER
V_OL Low output P6_0 to P6_7, P7_0 to P7_7, P8_0 to P8_7,
voltage P9_0 to P9_7, P10_0 to P10_7
P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7,
P3_0 to P3_7, P4_0 to P4_7, P5_0 to P5_7
V_OL Low output P6_0 to P6_7, P7_0 to P7_7, P8_0 to P8_7,
voltage P9_0 to P9_7, P10_0 to P10_7
P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7,
P3_0 to P3_7, P4_0 to P4_7, P5_0 to P5_7
V_OL Low output voltage XOUT
HIGHPOWER
LOWPOWER
Low output voltage XCOUT
HIGHPOWER
LOWPOWER
Measuring
Condition
I_OH = −5 mA
I_OH = −5 mA
I_OH = −200 μA
I_OH = −200 μA
I_OH = −1 mA
I_OH = −0.5 mA
With no load
applied
With no load
applied
I_OL = 5 mA
I_OL = 5 mA
I_OL = 200 μA
I_OL = 200 μA
I_OL = 1 mA
I_OL = 0.5 mA
With no load
applied
With no load
applied
V_CC1 = V_CC2 = 5 V
Standard
Unit
Min. Typ. Max.
V_CC1 − 2.0
V_CC1 V
V_CC2 − 2.0
V_CC2
V_CC1 − 0.3
V_CC1 V
V_CC2 − 0.3
V_CC2
V_CC1 − 2.0
V_CC1 V
V_CC1 − 2.0
V_CC1
2.6
V
2.2
2.0 V
2.0
0.45 V
0.45
2.0 V
2.0
0
V
0
Notes:
1. Referenced to V_CC1 = V_CC2 = 4.2 to 5.5 V, V_SS = 0 V at T_opr = −20 to 85°C/−40 to 85°C unless otherwise
specified.
2. When V_CC1 ≠ V_CC2, refer to 5 V or 3 V standard depending on the voltage.
REJ03B0277-0100 Rev.1.00 Jul.15, 2009
Page 57 of 90