|
M16C6C Datasheet, PDF (4/94 Pages) Renesas Technology Corp – RENESAS MCU | |||
|
◁ |
M16C/6C Group
1. Overview
1.2 Specifications
Table 1.1 to Table 1.2 list specifications.
Table 1.1
Item
Specifications (1/2)
Function
CPU
Central processing unit
Memory
Voltage
Detection
ROM, RAM, data flash
Voltage detector
Clock
Clock generator
External Bus
Expansion
Bus memory expansion
I/O Ports Programmable I/O ports
Interrupts
Watchdog Timer
DMA
DMAC
Description
Core
((multiplier: 16-bit à 16-bit 32-bit,
multiply and accumulate instruction: 16-bit à 16-bit + 32-bit 32-bit))
⢠Number of basic instructions: 91
⢠Minimum instruction execution time: 31.25 ns (f(BCLK) = 32 MHz, VCC1
= VCC2 = 2.7 to 5.5 V)
⢠Operating modes: Single-chip, memory expansion, and microprocessor
See âRefer to Table 1.3 âProduct Listâ .â
⢠Power-on reset
⢠3 voltage detection points (detection level of voltage detection 0
selectable)
⢠5 circuits:
Main clock, sub clock, low-speed on-chip oscillator (125 kHz), high-speed
on-chip oscillator (40 MHz ± 10%), PLL frequency synthesizer
⢠Oscillation stop detection: Main clock oscillation stop/reoscillation
detection function
⢠Frequency divider circuit: Divide ratio selectable from 1, 2, 4, 8, and 16
⢠Power saving features: Wait mode, stop mode
⢠Real-time clock
⢠Address space: 1 MB
⢠External bus interface: 0 to 3 wait states, 4 chip select outputs, 3 V and 5 V
interfaces
⢠Bus format: Separate bus or multiplexed bus selectable, data bus width (8
bits), number of address buses(12, 16, or 20)
⢠CMOS I/O ports: 85 (selectable pull-up resistors)
⢠N-channel open drain ports: 3
⢠Interrupt vectors: 70
⢠External interrupt inputs: 13 (NMI, INT à 8, key input à 4)
⢠Interrupt priority levels: 7
15-bit timer à 1 (with prescaler)
Automatic reset start function selectable
⢠4 channels, cycle steal mode
⢠Trigger sources:55
⢠Transfer modes: 2 (single transfer, repeat transfer)
REJ03B0277-0100 Rev.1.00 Jul.15, 2009
Page 2 of 90
|
▷ |