M16C6C Datasheet, PDF (62/94 Pages) Renesas Technology Corp – RENESAS MCU

M16C/6C Group
5. Electrical Characteristics
V_CC1 = V_CC2 = 5 V
5.2.2 Timing Requirements (Peripheral Functions and Others)
(V_CC1 = V_CC2 = 5 V, V_SS = 0 V, at T_opr = -20 to 85°C/-40 to 85°C unless otherwise specified)
Table 5.22 External Clock Input (XIN Input) ⁽¹⁾
Symbol
Parameter
t_c
t_w(H)
t_w(L)
t_r
t_f
External clock input cycle time
External clock input high pulse width
External clock input low pulse width
External clock rise time
External clock fall time
Note:
1. The condition is V_CC1 = V_CC2 = 3.0 to 5.0 V.
Standard
Unit
Min.
Max.
50
ns
20
ns
20
ns
9
ns
9
ns
Table 5.23 Timer A Input (Counter Input in Event Counter Mode)
Symbol
t_c(TA)
t_w(TAH)
t_w(TAL)
Parameter
TAiIN input cycle time
TAiIN input high pulse width
TAiIN input low pulse width
Standard
Unit
Min.
Max.
100
ns
40
ns
40
ns
Table 5.24
Symbol
t_c(TA)
t_w(TAH)
t_w(TAL)
Timer A Input (Gating Input in Timer Mode)
Parameter
TAiIN input cycle time
TAiIN input high pulse width
TAiIN input low pulse width
Standard
Unit
Min.
Max.
400
ns
200
ns
200
ns
Table 5.25 Timer A Input (External Trigger Input in One-Shot Timer Mode)
Symbol
Parameter
Standard
Unit
Min.
Max.
t_c(TA)
t_w(TAH)
t_w(TAL)
TAiIN input cycle time
TAiIN input high pulse width
TAiIN input low pulse width
200
ns
100
ns
100
ns
Table 5.26 Timer A Input (External Trigger Input in Pulse Width Modulation Mode)
Symbol
Parameter
Standard
Unit
Min.
Max.
t_w(TAH)
t_w(TAL)
TAiIN input high pulse width
TAiIN input low pulse width
100
ns
100
ns
Table 5.27 Timer A Input (Two-Phase Pulse Input in Event Counter Mode)
Symbol
Parameter
Standard
Unit
Min.
Max.
t_c(TA)
t_{su(TAIN-TAOUT)}
t_{su(TAOUT-TAIN)}
TAiIN input cycle time
TAiOUT input setup time
TAiIN input setup time
800
ns
200
ns
200
ns
REJ03B0277-0100 Rev.1.00 Jul.15, 2009
Page 60 of 90