M16C6C Datasheet, PDF (76/94 Pages) Renesas Technology Corp – RENESAS MCU

M16C/6C Group
5. Electrical Characteristics
Table 5.39 Electrical Characteristics (2) ^{(1, 2)}
Symbol
Parameter
I_IL
Low input P0_0 to P0_7, P1_0 to P1_7,
current P2_0 to P2_7, P3_0 to P3_7,
P4_0 to P4_7, P5_0 to P5_7,
P6_0 to P6_7, P7_0 to P7_7,
P8_0 to P8_7, P9_0 to P9_7,
P10_0 to P10_7
XIN, RESET, CNVSS
R_PULLUP Pull-up P0_0 to P0_7, P1_0 to P1_7,
resistance P2_0 to P2_7, P3_0 to P3_7,
P4_0 to P4_7, P5_0 to P5_7,
P6_0 to P6_7, P7_2 to P7_7,
P8_0 to P8_4, P8_6, P8_7,
P9_0 to P9_7, P10_0 to P10_7
R_fXIN Feedback resistance XIN
R_fXCIN Feedback resistance XCIN
V_RAM RAM retention voltage
Measuring Condition
V_I = 0 V
Standard
Unit
Min. Typ. Max.
−4.0 μA
V_I = 0 V
50
80 150 kΩ
In stop mode
3.0
MΩ
16
MΩ
1.8
V
Notes:
1. Referenced to V_CC1 = V_CC2 = 2.7 to 3.3 V, V_SS = 0 V at T_opr = −20 to 85°C/−40 to 85°C unless otherwise
specified.
2. When V_CC1 ≠ V_CC2, refer to 5 V or 3 V standard depending on the voltage.
REJ03B0277-0100 Rev.1.00 Jul.15, 2009
Page 74 of 90