SH72544R Datasheet, PDF (51/56 Pages) Renesas Technology Corp – Microcomputer Development Environment System

Section 2 Software Specifications when Using the SH72546RFCC, SH72544R, SH72543R, SH72531FCC,
and SH72531
The contents of the [Memory Mapping] dialog box are shown below.
[Mode]
[ERAM Setting]
[OK]
[Cancel]
[User]
[Emulator]
[Edit…]
[Reset]
[Reset All]
The emulator does not use the emulation RAM.
The emulator uses the emulation RAM.
Open the dialog box for setting [Memory Mapping] to change the
address ranges and attributes of the emulation RAM.
Reset the selected emulation RAM as default.
Reset all emulation RAMs as default.
Reflect changes and close the [Memory Mapping] dialog box.
Reflect no changes and close the [Memory Mapping] dialog box.
Figure 2.8 Dialog Box for Setting [Memory Mapping]
Rev. 2.00 Jun. 08, 2009 Page 45 of 46
REJ10J1941-0200