SH72544R Datasheet, PDF (49/56 Pages) Renesas Technology Corp – Microcomputer Development Environment System

Section 2 Software Specifications when Using the SH72546RFCC, SH72544R, SH72543R, SH72531FCC,
and SH72531
Notes: 1. In the non-realtime trace mode of the AUD trace, normal counting cannot be performed
because the generation state of the stall or the execution cycle is changed.
2. For SH72546RFCC or SH72531FCC do not set measurement items for the cache-miss
counts, cacheable area, or non-cacheable area.
3. Even when [Exception/interrupt counts (EA)] is selected as the measurement item, no
trap-instruction exception caused by TRAPA instructions will be counted.
(2) Displaying the Measured Result
The measured result is displayed in the [Performance Analysis] window or the
PERFORMANCE_ANALYSIS command with hexadecimal (32 bits).
Note: If a performance counter overflows as a result of measurement, “********” will be
displayed.
(3) Initializing the Measured Result
To initialize the measured result, select [Initialize] from the popup menu in the [Performance
Analysis] window or specify INIT with the PERFORMANCE_ANALYSIS command.
Rev. 2.00 Jun. 08, 2009 Page 43 of 46
REJ10J1941-0200