SH72544R Datasheet, PDF (14/56 Pages) Renesas Technology Corp – Microcomputer Development Environment System

Section 1 Connecting the Emulator with the User System
Pin
No. ^Signal
Input/
Output^*1
SH72546RFCC
SH72544R
SH72543R
Pin No.
Note
Pin
No. ^Signal
Input/
Output^*1
SH72546RFCC
SH72544R
SH72543R
Pin No.
Note
1 N.C.
2 N.C.
20 ^N.C.
21 TRST# ^*2
Input
B17
3 N.C.
22 N.C.
4 N.C.
5 UCON# (GND) ^*3
6 AUDCK
Output
G18
23 N.C.
24 AUDATA3 Output
D17
25 N.C.
7 N.C.
26 AUDATA2 Output
F18
8 N.C.
9 RES# ^*2
10 N.C.
Output
B12
27 N.C.
User reset 28 AUDATA1 Output
E17
29 N.C.
11 TDO
Output
C16
30 AUDATA0
Output
E18
12 UVCC_AUD
Output
31 N.C.
13 N.C.
32 AUDSYNC# Output
D18
14 UVCC
15 TCK
Output
Input
B18
33 N.C.
34 AUDRST# _Input
D16
16 N.C.
35 _N.C.
17 TMS
18 N.C.
Input
D15
36 _AUDMD
Input
C17
37 _N.C.
19 TDI
Input
A19
38 N.C.
Notes: 1. Input to or output from the user system.
2. The symbol (#) means that the signal is active-low.
3. The emulator monitors the GND signal of the user system and detects whether or not the user system is connected.
4. The GND bus lead at the center of the H-UDI port connector must be grounded.
37
1
6.91
38
2
25.4
H-UDI port connector (top view)
Unit: mm
Figure 1.4 Pin Assignments of the H-UDI Port Connector (38 Pins)
Rev. 2.00 Jun. 08, 2009 Page 8 of 46
REJ10J1941-0200