SH72544R Datasheet, PDF (12/56 Pages) Renesas Technology Corp – Microcomputer Development Environment System

Section 1 Connecting the Emulator with the User System
Pin
No. ^Signal
1 AUDCK
Input/
Output^*1
Output
SH72546RFCC
SH72544R
SH72543R
Pin No.
Note
G18
Pin
No. ^Signal
19 TMS
Input/
Output^*1
Input
SH72546RFCC
SH72544R
SH72543R
Pin No.
D15
Note
2 GND
3 AUDATA0 Output
E18
4 GND
5 AUDATA1 Output
E17
6 GND
7 ^AUDATA2
Output
F18
8 GND
20 GND
21 _TRST#^*2
Input
B17
22 GND
23 TDI
Input
A19
24 GND
25 ^TDO
Output
C16
26 GND
9 AUDATA3
Output
D17
27 N.C.
10 GND
11 AUDSYNC#^*2 Output
D18
28 GND
29 UVCC
Output
12 GND
13 AUDRST#^*2 Input
D16
14 GND
30 _GND
31 RES#^*2
Output
B12
32 GND
User reset
15 AUDMD
Input
C17
16 _GND
17 TCK
Input
B18
18 GND
33 GND^*3
34 _GND
35 N.C.
36 GND
Output
Notes: 1. Input to or output from the user system.
2. The symbol (#) means that the signal is active-low.
3. The emulator monitors the GND signal of the user system and detects whether or not the user system is connected.
4
φ 2.8^+00.1 2
Edge of the board
(connected to the connector)
φ0.7^+00.1 36
H-UDI port connector (top view)
3
1
4.09
35
1.27
21.59
37.61
43.51
: Pattern inhibited area
H-UDI port connector (top view)
(Pin 1 mark)
M2.6 x 0.45
H-UDI port connector (front view)
Unit: mm
Figure 1.2 Pin Assignments of the H-UDI Port Connector (36 Pins)
Rev. 2.00 Jun. 08, 2009 Page 6 of 46
REJ10J1941-0200